Auerswald 2500 - Manual (Page 58)

Make a Call
Outbound Call
58
The called Telephone is busy – Start automatic Recall
The external connection must meet the technical requirements for an automatic recall. For
example: The automatic recall to a PTP connection is not supported by each network pro-
vider.
It is possible that you are called by the public exchange as soon as one B channel of the pre-
viously called ISDN connection is free. If the person you want to recall is telephoning on the
other B channel, this recall will be without success.
An automatic recall is processed up to 45 minutes in the public exchange. If the subscriber
you like to talk with did not finish his call until then, the automatic recall will be cancelled auto-
matically. If you do not pick up the receiver in time (you are called for 30 seconds), the auto-
matic recall will also be cancelled.
The subscriber called by you is
busy.
recall
Press the softkey to start automatic recall.
If the recall has been activated,
you get the message “recall ac-
tivated”.
B
Hang up the receiver.
As soon as the subscriber is
not busy anymore, you are
called by the central office/
PBX.
A
Pick up the receiver to initiate the recall.
or
reject
Press the softkey to cancel the recall.
If you pick up the receiver, the
subscriber is called.
☞
Important
☞
Advice