Pic. 13 : settings menu, Pic. 13: settings menu – Auerswald 2500 User Manual
Page 36
Introduction
Display-driven Usage of the Telephone
36
Selection List* in the Settings Menu:
– Synchronization
– Answering machine
– Backup
– User settings
– Display
– Default settings
– Lists
– Signalling
– Blocking
Pic. 13: Settings Menu
Selection List* for Def. settings:
– Headset type (
– Language (
)
– MSN (
)
– VMC461.2 FW >= 2.02 (
)
– additional **
Selection List* for Lists:
– Caller list (
– Calls list (
)
– Phone book (
– Redial list (
– additional **
Selection List* for Signalling:
– Attention tone (
)
– Call waiting tone (
– Headset ringer (
– Message LED (
– Ringer melody (
– Ringer volume (
– additional **
Selection List* for Display:
– Date format (
)
– Display light (
)
– Time format (
)
– Brightness max. (
)
– Brightness min. (
)
– Contrast (
– additional **
Selection List* for Blocking:
– User PIN (
– Function lock (
– Settings lock (
– additional **
* Scroll to the requested selection with the
softkeys and press the softkey to select the function.
To scroll back to the previous menu level, press the
softkey.
To return to the idle state, press the exit key. Besides this the telephone automatically switches back to the idle
state if no key has been pressed for 30 seconds.
** The functions available in the selection list can be blocked against unauthorized use (
). The release or dis-
play of these blocked functions in the selection list requires to enter of the corresponding PIN after selecting “addi-
tional” (see also
). The release stays active during the now following settings and will be re-
blocked again after 60 seconds without pressing a key or by pressing the selection “logout” in the menu “settings
̈
blocking
̈
additional”. Additionally in this menu it is possible to check and change the now existing releases.