Auerswald 2500 - Manual (Page 134)

Use of the Telephone and PBX System
Group Functions of the PBX
134
Assign Key:
Use Function via Key:
By pressing the key the telephone is logged in or out of the group configured for the key.
LED Signalling next to the Key:
...
Press the softkey to the left of the option
you require:
ț logging in: Log the telephone into a group.
ț log out: Log the telephone out of a group.
Use the and softkeys to browse to the
option you require and press the softkey to
the left of the option:
ț outbound: Select the call mode outbound.
ț inbound: Select the call mode inbound.
ț inbnd. & outbnd.: Select the call mode
inbound and outbound.
...
Open the key programming menu for the func-
tion “group” (You will find help on
page 33 and
the following).
define keys
function key ...
... level
group
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
page 155 and the following):
ț [general/defined]: Switches over from gen-
eral to defined assignment.
ț [telephone number]: Allows to select the
group by its name/number.
ț [name]: Allows to enter a name for the
group.
ț [action]: Allows the assignment with log in,
log out or log over.
ț [direction]: Allows the assignment with
inbound, outbound or inbound & outbound.
Press the softkey to complete the settings.
green The telephone is logged into the group.
off The telephone is logged out of the group.