Lc - current limit flag – ElmoMC SimplIQ Digital Servo Drives-Bell Command Reference User Manual
Page 102
Advertising
LC - Current Limit Flag
Purpose:
Reports the status of the current limiting process.
After an excessive demand for large currents, the drive automatically limits itself to
the continuous limit (CL[1]=1).
The LC flag returns the state of this automatic limiter.
Value Description
0
The motor current is limited to the limit PL[1], or the motor is off.
1
The motor current is limited to the continuous limit CL[1].
Table 3-26: LC Return Values
Attributes: Type:
Status report, Integer
Scope:
Program, RS-232, CANopen
Restrictions: None
Unit modes: All
SimplIQ: Similar
See also:
MC
,
PL[N]
,
CL[N]
Application note:
Current limiting
SimplIQ for Steppers Command Reference Manual
Alphabetical Listing
MAN-STECR (Ver. 1.1)
94
Advertising