Mc - maximum peak driver current – ElmoMC SimplIQ Digital Servo Drives-Bell Command Reference User Manual
Page 108
Advertising
MC - Maximum Peak Driver Current
Purpose:
Reports the maximum phase current allowed for the drive, in amperes. This command
informs the software about the type of servo drive used with the controller.
Attributes:
Type: Report,
Real
Source:
Program, RS-232, CANopen
Restrictions: Read
only
Unit modes: All
SimplIQ: Similar
You may limit the current for a specific application using the PL[1] and CL[1]
commands.
See also:
IQ
,
ID
,
CL[N]
,
PL[N]
SimplIQ for Steppers Command Reference Manual
Alphabetical Listing
MAN-STECR (Ver. 1.1)
100
Advertising