ElmoMC SimplIQ Digital Servo Drives-Bell Command Reference - Manual (Page 68)

EO - Echo Mode
Purpose:
Sets or resets the communication echo mode, which is used for communication checks.
EO=1 enables echo mode
EO=0 disables it.
With RS-232 communication, the EO command sends an immediate echo character for
every terminal character.
Attributes: Type: Parameter, Integer
Source: RS-232
Restrictions: None
Default value: 1,
Volatile
Range: [0, 1]
Unit modes: All
Activation: Immediate
SimplIQ: Similar
SimplIQ for Steppers Command Reference Manual Alphabetical Listing
MAN-STECR (Ver. 1.1)
60