Rockwell Automation 1791DS-IBxxxx Guard I/O DeviceNet Safety Modules - Manual (Page 148)

148 Rockwell Automation Publication 1791DS-UM001J-EN-P - May 2013
Appendix A Get Point Status from Modules by Using Explicit Messaging
I/O Assembly and Reference
Data See the tables for I/O assembly and reference data.
1791DS-IB12, 1791DS-IB8XOB8, 1791DS-IB4XOW4 Data
The bits in the tag definitions of the Logix Designer application and RSNetWorx
for DeviceNet software are different than those shown in this section. This table
defines the name associations for clarification with the programming software.
Bit Definitions Logix Designer Application Tag Name
Safety Input 0 Pt00Data
Safety Input 11 Pt11Data
Safety Input 0 Status Pt00InputStatus
Safety Input 11 Status Pt11InputStatus
Safety In Status InputStatus
Muting Lamp Status MutingStatus
Safety Output 0 Pt00Data
Safety Output 7 Pt07Data
Standard Output 0 Test00Data
Standard Output 3 Test03Data
Safety Output 0 Status Pt00OutputStatus
Safety Output 7 Status Pt07OutputStatus
Safety Out Status OutputStatus
Safety Output 0 Monitor Pt00Monitor
Safety Output 7 Monitor Pt07Readback
Test Output 0 Status Pt00TestOutputStatus
Test Output 3 Status Pt03TestOutputStatus