Rockwell Automation 1791DS-IBxxxx Guard I/O DeviceNet Safety Modules - Manual (Page 54)

54 Rockwell Automation Publication 1791DS-UM001J-EN-P - May 2013
Chapter 4 Wiring Examples
Single Channel
This example shows wiring and controller configuration when using a Guard I/O
module with a single channel. If used in combination with the programs in a
safety controller, this wiring is Safety Category 4 in accordance with EN 954-1
wiring requirements.
V0 IN0 V1 OUT 0
G0
FE1 FE2
K1
T0 G1 G1
K1
M
31821-M
K1
V0, G0: Input Power Connection
V1, G1: Output Power Connection
M: Three-phase Motor