Device mode parameters – Rockwell Automation 1440-VSE02-01RA XM-122 gSE Vibration Module User Manual
Page 103
Publication GMSI10-UM013D-EN-P - May 2010
Configuration Parameters 93
Device Mode Parameters
The Device Mode parameters are used to control the functions and the
behavior of the device.
IMPORTANT
The XM Serial Configuration Utility handles these
parameters automatically and transparently to the user.
Device Mode Parameters
Parameter Name
Description
Values/Comments
Device Mode
Sets the current operation mode of the device. Refer
to Changing Operation Modes on page 103 for more
information.
Options: Run Mode
Program Mode
Autobaud
Enables/disables autobaud.
When autobaud is set to "Enabled," the module will
listen to other devices on the network to determine
the correct baud rate to use for communications.
When autobaud is set to “Disabled,” the module
baud rate must be set manually.
Options: Enabled
Disabled