Rockwell Automation 1440-VSE02-01RA XM-122 gSE Vibration Module - Manual (Page 189)

179 Publication GMSI10-UM013D-EN-P - May 2010
Appendix
D
Wiring Connections for Previous Module
Revisions
Appendix D provides the terminal block assignments and wiring connections
of earlier revisions of the XM-122 module (before revision D01). If you have a
later revision of the module, refer to Chapter 2 for wiring information.
The revision number can be found on the product label which is located on
the front of the XM module (see Figure D.1).
Figure D.1 Location of Revision Number on Product Label
Terminal Block
Assignments The terminal block assignments and descriptions of an earlier revision of the
XM-122 module are shown on page 180
Revision number of XM
module
ATTENTION
The terminal block assignments are different for different
XM modules. The following table applies only to the
XM-122 module (before revision D01).