Rockwell Automation 1440-VSE02-01RA XM-122 gSE Vibration Module - Manual (Page 108)

Publication GMSI10-UM013D-EN-P - May 2010
98 Specifications
Complex Data Spectra (synchronous or asynchronous)
gSE Spectra
Waveform (synchronous or asynchronous)
Simultaneous Waveforms (synchronous)
Measured Parameters
Overall
4 (overlapping) Bands Per Channel
(Hz or Order based)
Gap (or transducer bias voltage)
Speed
Acceleration
Orders
Not 1x
Sum Harmonics
gSE Overall
RMS
Peak (true or calculated)
Peak to Peak (true or calculated)
Band overall, or
Max peak in band
Magnitude: 1x, 2x, 3x
Phase: 1x, 2x
Sum Harmonics is the sum of all harmonics
from a user-defined first order to the
maximum order in the spectra.
Data Buffers
Delta Time Buffer
Delta RPM Buffer
Spectra or Waveform
Number or Records: 2048
Delta Time Interval: 1 to 3600 seconds
Trigger Mode: Relay on the XM-122 module
is activated, or by a trigger signal (for
example, DeviceNet command from a
controller or host).
Number of Records: 512
Delta Speed Interval: 1 to 3600 RPM
Trigger Mode: Startup collects data in
increasing rpm direction only; Coast-down
collects data in both increasing and
decreasing directions.
Note: The data collected in the buffer is user
defined and may contain up to 16 of the
Measured Parameters specified above.
Saved upon same trigger as Delta Time
Buffer
XM-122 Technical Specifications
Product Feature Specification