Connecting the buffered outputs – Rockwell Automation 1440-VSE02-01RA XM-122 gSE Vibration Module User Manual
Page 37
Advertising
Publication GMSI10-UM013D-EN-P - May 2010
Installing the XM-122 gSE Vibration Module 27
Connecting a Non-Contact Sensor to the Tachometer Signal
Figure 2.15 shows the wiring of a non-contact sensor to the tachometer input
signal.
Figure 2.15 Non-Contact Sensor to Tachometer Signal Connection
Connecting the Buffered Outputs
The XM-122 provides buffered outputs of all transducer input signals. The
buffered output connections may be used to connect the module to portable
data collectors or other online systems.
Figure 2.16 shows the buffered output connections for the module.
SIG
-24
COM
Signal Common
Tach Input Signal
-24V DC
Shield
S hield Floating
I sol at ed Sensor Dri ver
20 21
31
4
18
Advertising