Kontron NSC2U IP Network Server - Manual (Page 100)

NSC2U Server—5
Kontron IP Network Server NSC2U
Product Guide, rev. 1.4 December 2009
100
5.2.1 Removing the CPU Fans
1. Remove the chassis top cover and the processor air duct that covers the fans. For
instructions, see Section 3.2.1 and Section 3.2.5 .
2. Unplug the CPU fan power cables from the front panel board. ( Figure 86 , “A”)
3. Lift the fans out of the chassis. (“B”)
Figure 86. Removing the CPU Fans from the Chassis
A
B
TS000557