Kontron NSC2U IP Network Server - Manual (Page 19)

Kontron IP Network Server NSC2U
December 2009 Product Guide, rev. 1.419
Features—NSC2U Server
• one USB2.0 interface to the SMART Embedded USB Solid-State Drive, which
provides local memory storage
• a single flex cable connection to the SAS backplane to support the interface to six
independent 2.5-inch SAS hard drives
• a socket for a hardware RAID key, required to enable hardware RAID
• a socket for a DDR2 mini-DIMM that provides data caching for hardware RAID
• a connector for the Intelligent Battery Backup Unit (IBBU) that allows the contents
of the DDR2 mini-DIMM to be preserved if power falls below specifications.
• four fan connectors to provide power, control, and monitoring for the four cooling
fans
• four fan fault LEDs (not visible on front panel; for diagnostics purposes only)
2.6 Server Board Connector and Component Locations
Figure 7 shows the locations of connectors and components on the T5000PAL Server
Board.
Figure 7. Server Board T5000PAL Diagram
TS000277
K
L
J
Q P O N R M
BB
CC
AA
Z
Y
X
W
T
U
S
B A E D F H G C
I
V