4 nsc2u server rear panel ethernet ports, Nsc2u server rear panel ethernet ports, Figure 6 – Kontron NSC2U IP Network Server User Manual

Page 17: For de

Advertising
background image

Kontron IP Network Server NSC2U

December 2009

Product Guide, rev. 1.417

Features—NSC2U Server

2.4

NSC2U Server Rear Panel Ethernet Ports

The NSC2U Server has two GbE NIC ports mounted on the baseboard that are

accessible from the rear of the chassis.

Additional rear-accessible GbE NIC ports can be added to the system by using full-

height PCI-X/PCIe add-in cards or low-profile PCIe add-in cards. The possible

configurations of full-height PCI-X/PCIe add-in cards are given in

Table 2

and the

possible configurations of low-profile PCIe add-in cards are given in

Table 3

. Also, a

dual GbE I/O option module is supported that adds two RJ45, 1 Gigabit Ethernet ports

accessible on the rear panel.

Figure 6.

NSC2U Server Control Panel

Item

Feature

Description

Front Panel LEDs

A

Main power LED (green)

When continuously lit, indicates the presence of power supply DC output

power in the server. The LED turns off when the main output power from

the power supply is turned off or the power source is disrupted.

B

System Status (green/

amber)

Indicates system status as follows:

• Steady green indicates system in standby or ready for operation.
• Blinking green indicates degraded operation (e.g., power supply non-

redundancy, part of system memory mapped out by BIOS).

• Blinking amber indicates one or more non-critical fault conditions.
• Steady amber indicates one or more critical fault conditions.

C

HDD Activity/Fault LED

(green/amber)

Indicates HDD activity when green, or an HDD fault when amber. This is

an aggregated indication for all hard disk drives (up to six) in the system.

Each hard disk contains its own activity and fault indicators.

D

NIC activity LED (green)

Indicates NIC activity when lit

E

System ID LED (blue)

Indicates system identity
LED can be toggled remotely or by front-panel ID switch for identification

purposes

Front Panel Switches

F

ID switch

Toggles system ID LED

G

NMI switch

Asserts NMI to the T5000PAL server board

H

Reset switch

Resets the system

I

Power switch

Toggles the system power

A B C D E

H

F

I

G

TS000112

Advertising