Kontron NSC2U IP Network Server - Manual (Page 24)

NSC2U Server—Features
Kontron IP Network Server NSC2U
Product Guide, rev. 1.4 December 2009
24
2.11 Hardware Requirements
To avoid integration difficulties and possible board damage, your system must meet the
requirements outlined below. For a list of qualified components, see Section 1.4 ,
“Additional Information and Software” .
2.11.1 Processor
The server board accommodates two quad-core or dual-core processors from the
Intel ® Xeon ® processor 5000 sequence. For a list of the currently supported
processors, see the Configuration Guide at:
http://us.kontron.com/products/systems+and+servers+and+platforms/
communication+rackmount+servers/ip+network+servers/
ip+network+server+nsc2u.html
Click on Downloads, Ordering Guide.
2.11.2 Memory
On the T5000PAL server board, the Memory Controller Hub (MCH) accommodates four
channels of Fully Buffered DIMM (FB-DIMM) memory. Each channel can support up to
two Dual Ranked FB-DIMM DDR2 DIMMs. FB-DIMM memory channels are organized
into two branches for support of RAID 1 (mirroring). See Section 3.4.2 , “Configuring
Memory DIMMs” for detailed information about population rules and instructions for
installing DIMMs in the sockets on the server board.