Kontron NSC2U IP Network Server - Manual (Page 63)

Kontron IP Network Server NSC2U
December 2009 Product Guide, rev. 1.4
63
Optional Component Installations—NSC2U Server
4.5.4 Connecting the GbE LAN Cables to the Front Panel
To connect the GbE cables for front panel LAN access, the filler panel must be removed
and the GbE escutcheon installed. Then, the 4xGbE connector assembly can be
attached to the escutcheon. Once these steps are done, the components that were
removed from the chassis or disconnected are reinstalled and the chassis is closed up
and the power reconnected.
Figure 46. Routing the GbE Cables through the Cable Management Bracket
TS000552
A
B