Kontron NSC2U IP Network Server - Manual (Page 99)

Kontron IP Network Server NSC2U
December 2009 Product Guide, rev. 1.4
99
5.2 Replacing the Fan Assemblies
Caution: Your server does not have hot-swappable fans. Before replacing any of the fan
assemblies, you must first take the server out of service, turn off all peripheral devices
connected to the system, turn off the system by pressing the power button, and unplug
the power cord(s) from the system or wall outlet.
The replacement/spare fan set consists of two dual-rotor PCI fans (“A”), two dual-rotor
CPU fans (“B”), and the push rivets to attach them to the fan brackets.
Figure 85. PCI Fan and CPU Fan Assemblies
A
B
TS000556