Kontron NSC2U IP Network Server - Manual (Page 105)

Kontron IP Network Server NSC2U
December 2009 Product Guide, rev. 1.4
105
5.2.4 Replacing the PCI Fans in the Fan Shroud
1. Remove the old fans from the fan shroud.
2. Align the new fans into the fan shroud with the airflow arrows pointing toward the
back of the chassis. ( Figure 91 , “A”).
3. Fasten each fan into the shroud using four grommets. (“A”) Note that the heads of
the grommets should be between the fans and the shroud.
Figure 91. Installing the PCI Fans into the Shroud
TS000562
A