Kontron NSC2U IP Network Server - Manual (Page 62)

NSC2U Server—Optional Component Installations
Kontron IP Network Server NSC2U
Product Guide, rev. 1.4 December 2009
62
6. Fully install the PCI riser card assembly now and carefully route the GbE cables and
LED ribbon cable to the front of the chassis.
7. Route the cables along the SAS backplane and along the right side of the SAS drive
bayassembly.
8. Secure the GbE cables with the cable management bracket and re-fasten the cable
management bracket to the side of the drive bay assembly. ( Figure 46 , “A” and
“B”)
Figure 45. Installing the PCI Fan Assembly Extensions
TS000551
A