Kontron NSC2U IP Network Server - Manual (Page 30)

NSC2U Server—Server Component Installations and Upgrades
Kontron IP Network Server NSC2U
Product Guide, rev. 1.4 December 2009
30
2. Install the new drive in the drive tray and secure the drive with the four screws that
come with the drive tray. ( Figure 14 , “A” and “B”)
3. With the drive tray locking lever fully open, push the hard drive tray into the drive
bay in the chassis until it stops. ( Figure 15 , “A”)
4. Press the lever until it snaps shut to secure the drive in the bay.
5. Replace the front bezel.
Figure 13. Removing a Hard Drive from the Drive Tray
TS000219
A
Figure 14. Installing a Hard Drive in the Drive Tray
AF000810
A
B