Kontron NSC2U IP Network Server - Manual (Page 76)

NSC2U Server—Optional Component Installations
Kontron IP Network Server NSC2U
Product Guide, rev. 1.4 December 2009
76
11. Remove the riser card assembly from the chassis. Remove the filler panel for the
slot you’ll be using for the Fiber LAN card (“A” in Figure 60 ). Loosen the blue
thumbscrew on the retention clip and rotate the clip outward (“B”). Insert the LAN
card into the selected full-height PCI Express riser card slot connecter (“C”). Fasten
the LAN card to the riser assembly bracket using the rear retention screw (“D”).
Figure 60. Installing the Fiber LAN card into the PCI Card Carrier Assembly
JA4
JA3
JA2
JA1
A
B
C
D
TS000521