Kontron NSC2U IP Network Server - Manual (Page 46)

NSC2U Server—Server Component Installations and Upgrades
Kontron IP Network Server NSC2U
Product Guide, rev. 1.4 December 2009
46
Caution: The underside of the processor has components that may damage the socket pins if
installed improperly. The processor must align correctly with the socket opening before
installation. Gently place the processor onto the socket surface. Do not drop the
processor into the socket!
2. Orient the processor with the socket so that the processor cutouts match the
socket notches. (See Figure 30 , “A”.)
3. Gently place the processor in the socket. (“B”)
4. Remove the socket protective cover by grasping the cover tab and pulling it away
from the load plate. Store the protective cover for future use. (“A” and “B”)
Figure 29. Removing the Processor Protective Cover
A
AF000770
Figure 30. Installing the Processor in the Processor Socket
A
B
AF000771