Before requesting service – Panasonic NVSX30EG User Manual

Page 140

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ENGLISH

Before Requesting Service

Power Source

Symptom

Cause

Action

Page-

•Movie Camera does not turn |

on.

►•When using Battery as power source:

Attached Battery is discharged.

•Attach fully charged Battery.

24

•Movie Camera has turned off »»Recording was paused for more than 6

automatically. | minutes.

•Turn Movie Camera off гmd then on again.

46

•Movie Camera quickly turns |k»Condensatk>n has formed inside Movie

off. Camera.

•Wait until condensation has cleared up

(approximately 2-3 hours).

120

Cassette

• Remaining Tape Time i

Indication is not correct.

k»Tape length of inserted cassette is not

correctly selected.

•Select correct tape length.

28

•X-ray inspection was done at

\

airport. Did it affect

cassettes?

k»No, it has no adverse influence.

•When playing back stored

cassette, picture is distorted.

<1

^•Cassette may have been magnetized by

other equipment.

•Unfortunately, there is no remedy.

Store cassettes correctly.

118

^•Cassette was stored in unsuitable place.

•Unfortunately, there is no remedy.

Store cassettes correctly.

118

Recording

•Movie Camera is turned on |

but no picture appears in
Finder.

►•Power Save Functions have become

activated.

•Hold Movie Camera in horizontal position.

Or set [POWER SAVE] Switch to [OFF].

70

•Recording does not start f

when pressing Start/Stop

Button.

►•Tab of inserted cassette is broken out.

•Insert cassette with intact tab.

Or cover hole with two layers of adhesive

tape.

30

•Date/Time/Title Indication is |

not displayed in Rnder.

►•Incorrect operation of [DATE/TITLE] and/or

[DISPLAY SELECT] Buttons.

•Press [DATE/TITLE] Button so that

Date/Time/Title Indication appears, and then
press [DISPLAY SELECT] Button until
desired Indication appears.

38,106

•Oatenime Indication is not |

displayed in Finder.

►•Built-in lithium battery is discharged.

•Charge built-in lithium battery.

42

Playback

•When playing back from ^

Movie Camera to connected

TV, no playback picture is

reproduced on TV.

L»[P0WER] Switch of Movie Camera is not

turned out.

•Turn [POWER] Switch out and press

[VCR/CAMERA] Button so that [VCR] Lamp
lights.

56

•When playing back from d

Movie Camera to connected L

TV, playback picture is 1

distorted or contains noise

bars.

►•Tape is loose.

•Tighten tape.

26

►•Video heads are dirty.

•Clean video heads with optional video head

cleaning cassette.

120

1

►•Colour adjustment on TV is not made

properly.

•Adjust colour control on TV.

►•Tracking is not adjusted correctly.

•Adjust tracking correctly.

64

-140-

Advertising