Cisco ASA 5505 - Manual (Page 13)

Contents
xiii
Cisco ASA 5500 Series Configuration Guide using the CLI
Information About Object Groups 13-2
Licensing Requirements for Objects and Groups 13-2
Guidelines and Limitations for Objects and Groups 13-3
Configuring Objects 13-3
Configuring a Network Object 13-3
Configuring a Service Object 13-4
Configuring Object Groups 13-6
Adding a Protocol Object Group 13-6
Adding a Network Object Group 13-7
Adding a Service Object Group 13-8
Adding an ICMP Type Object Group 13-9
Nesting Object Groups 13-10
Removing Object Groups 13-11
Monitoring Objects and Groups 13-11
Feature History for Objects and Groups 13-12
Configuring Regular Expressions 13-12
Creating a Regular Expression 13-12
Creating a Regular Expression Class Map 13-15
Scheduling Extended Access List Activation 13-16
Information About Scheduling Access List Activation 13-16
Licensing Requirements for Scheduling Access List Activation 13-16
Guidelines and Limitations for Scheduling Access List Activation 13-16
Configuring and Applying Time Ranges 13-17
Configuration Examples for Scheduling Access List Activation 13-18
Feature History for Scheduling Access List Activation 13-18
C H A P T E R
14 Information About Access Lists 14-1
Access List Types 14-1
Access Control Entry Order 14-2
Access Control Implicit Deny 14-3
IP Addresses Used for Access Lists When You Use NAT 14-3
Where to Go Next 14-3
C H A P T E R
15 Adding an Extended Access List 15-1
Information About Extended Access Lists 15-1
Licensing Requirements for Extended Access Lists 15-1
Default Settings 15-2
Configuring Extended Access Lists 15-2