Cisco av pair attribute syntax – Cisco ASA 5505 User Manual

Page 1911

Advertising
background image

C-13

Cisco ASA 5500 Series Configuration Guide using the CLI

Appendix C Configuring an External Server for Authorization and Authentication

Configuring an External LDAP Server

Cisco AV Pair Attribute Syntax

The Cisco Attribute Value (AV) pair (ID Number 26/9/1) can be used to enforce access lists from a
RADIUS server (like Cisco ACS), or from an LDAP server via an LDAP attribute map.

The syntax of each Cisco-AV-Pair rule is as follows:

[Prefix] [Action] [Protocol] [Source] [Source Wildcard Mask] [Destination] [Destination Wildcard
Mask] [Established] [Log] [Operator] [Port]

Table C-3

describes the syntax rules.

WebVPN-SVC-Rekey-Period

Y

Y

Integer

Single

0 = Disabled
n = Retry period in minutes
(4 - 10080)

WebVPN-SVC-Required-Enable

Y

Y

Integer

Single

0 = Disabled
1 = Enabled

WebVPN-URL-Entry-Enable

Y

Y

Integer

Single

0 = Disabled
1 = Enabled

WebVPN-URL-List

Y

String

Single

URL list name

Table C-2

ASA Supported Cisco Attributes for LDAP Authorization (continued)

Attribute Name

VPN 3000

ASA

PIX

Syntax/
Type

Single or
Multi-Valued

Possible Values

Table C-3

AV-Pair Attribute Syntax Rules

Field

Description

Action

Action to perform if the rule matches a deny or a permit.

Destination

Network or host that receives the packet. Specify it as an IP address, a
hostname, or the any keyword. If using an IP address, the source wildcard
mask must follow.

Destination Wildcard
Mask

The wildcard mask that applies to the destination address.

Log

Generates a FILTER log message. You must use this keyword to generate
events of severity level 9.

Operator

Logic operators: greater than, less than, equal to, not equal to.

Port

The number of a TCP or UDP port in the range of 0 - 65535.

Prefix

A unique identifier for the AV pair (for example: ip:inacl#1= for standard
access lists or webvpn:inacl# = for clientless SSL VPN access lists). This
field only appears when the filter has been sent as an AV pair.

Protocol

Number or name of an IP protocol. Either an integer in the range of 0 - 255
or one of the following keywords: icmp, igmp, ip, tcp, udp.

Advertising