Cisco ASA 5505 - Manual (Page 18)

Contents
xviii
Cisco ASA 5500 Series Configuration Guide using the CLI
Configuring OSPF Area Parameters 24-10
Configuring OSPF NSSA 24-11
Defining Static OSPF Neighbors 24-12
Configuring Route Calculation Timers 24-13
Logging Neighbors Going Up or Down 24-13
Restarting the OSPF Process 24-14
Configuration Example for OSPF 24-14
Monitoring OSPF 24-16
Feature History for OSPF 24-17
C H A P T E R
25 Configuring RIP 25-1
Information About RIP 25-1
Routing Update Process 25-2
RIP Routing Metric 25-2
RIP Stability Features 25-2
RIP Timers 25-2
Licensing Requirements for RIP 25-3
Guidelines and Limitations 25-3
Configuring RIP 25-4
Enabling RIP 25-4
Customizing RIP 25-4
Configuring the RIP Version 25-5
Configuring Interfaces for RIP 25-6
Configuring the RIP Send and Receive Version on an Interface 25-6
Configuring Route Summarization 25-7
Filtering Networks in RIP 25-8
Redistributing Routes into the RIP Routing Process 25-8
Enabling RIP Authentication 25-9
. Restarting the RIP Process 25-10
Monitoring RIP 25-11
Configuration Example for RIP 25-11
Feature History for RIP 25-11
C H A P T E R
26 Configuring Multicast Routing 26-1
Information About Multicast Routing 26-1
Stub Multicast Routing 26-2
PIM Multicast Routing 26-2
Multicast Group Concept 26-2