Cisco ASA 5505 - Manual (Page 1812)

79-32
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 79 Configuring SNMP
Feature History for SNMP
SNMP traps and
MIBs 8.4(1) Supports the following additional keywords: connection-limit-reached, cpu
threshold rising, entity cpu-temperature, entity fan-failure, entity power-supply,
ikev2 stop | start, interface-threshold, memory-threshold, nat packet-discard,
warmstart.
The entPhysicalTable reports entries for sensors, fans, power supplies, and related
components.
Supports the following additional MIBs: CISCO-ENTITY-SENSOR-EXT-MIB,
CISCO-ENTITY-FRU-CONTROL-MIB, CISCO-PROCESS-MIB,
CISCO-ENHANCED-MEMPOOL-MIB,
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB, DISMAN-EVENT-MIB,
DISMAN-EXPRESSION-MIB, ENTITY-SENSOR-MIB, NAT-MIB.
Supports the following additional traps: ceSensorExtThresholdNotification,
clrResourceLimitReached, cpmCPURisingThreshold, mteTriggerFired,
natPacketDiscard, warmStart.
We introduced or modified the following commands: snmp cpu threshold rising,
snmp interface threshold, snmp-server enable traps.
IF-MIB ifAlias OID
support 8.2(5)/8.4(2) The ASA now supports the ifAlias OID. When you browse the IF-MIB, the ifAlias
OID will be set to the value that has been set for the interface description.
SNMP traps 8.6(1) Supports the following additional keywords for the ASA 5512-X, 5515-X, 5525-X,
5545-X, and 5555-X: entity power-supply-presence, entity power-supply-failure,
entity chassis-temperature, entity chassis-fan-failure, entity
power-supply-temperature.
We modified the following command: snmp-server enable traps.
NAT MIB 8.4(5) Added the cnatAddrBindNumberOfEntries and cnatAddrBindSessionCount OIDs to
support the xlate_count and max_xlate_count entries, which are the equivalent to
allowing polling using the show xlate count command.
Table 79-7 Feature History for SNMP (continued)
Feature Name
Platform
Releases
Feature Information