Cisco ASA 5505 - Manual (Page 24)

Contents
xxiv
Cisco ASA 5500 Series Configuration Guide using the CLI
C H A P T E R
33 Configuring Special Actions for Application Inspections (Inspection Policy Map) 33-1
Information About Inspection Policy Maps 33-1
Guidelines and Limitations 33-2
Default Inspection Policy Maps 33-2
Defining Actions in an Inspection Policy Map 33-2
Identifying Traffic in an Inspection Class Map 33-6
Where to Go Next 33-7
P A R T
9 Configuring Access Control
C H A P T E R
34 Configuring Access Rules 34-1
Information About Access Rules 34-1
General Information About Rules 34-2
Implicit Permits 34-2
Information About Interface Access Rules and Global Access Rules 34-2
Using Access Rules and EtherType Rules on the Same Interface 34-2
Implicit Deny 34-3
Inbound and Outbound Rules 34-3
Information About Extended Access Rules 34-4
Access Rules for Returning Traffic 34-4
Allowing Broadcast and Multicast Traffic through the Transparent Firewall Using Access
Rules
34-5
Management Access Rules 34-5
Information About EtherType Rules 34-5
Supported EtherTypes and Other Traffic 34-6
Access Rules for Returning Traffic 34-6
Allowing MPLS 34-6
Licensing Requirements for Access Rules 34-6
Prerequisites 34-7
Guidelines and Limitations 34-7
Default Settings 34-7
Configuring Access Rules 34-7
Monitoring Access Rules 34-8
Configuration Examples for Permitting or Denying Network Access 34-9
Feature History for Access Rules 34-10