Cisco ASA 5505 - Manual (Page 1799)

79-19
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 79 Configuring SNMP
Configuring SNMP
• Sends traps (event notifications) to NMSs.
To enable the SNMP agent and identify an NMS that can connect to the SNMP server, enter the following
command:
Command Purpose
snmp-server enable
Example:
hostname(config)# snmp-server
enable
Ensures that the SNMP server on the ASA is enabled. By default, the SNMP server
is enabled.