Cisco ASA 5505 - Manual (Page 1775)

78-11
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 78 Configuring NetFlow Secure Event Logging (NSEL)
Monitoring NSEL
destination: inside 209.165.200.225 2055
Statistics:
packets sent 250
Errors:
block allocation errors 0
invalid interface 0
template send failure 0
no route to collector 0
The following example shows how to display the flow-export active configuration:
hostname (config)# show running-config flow-export active
flow-export active refresh-interval 2
The following example shows how to display the flow-export delay configuration:
hostname (config)# show running-config flow-export delay
flow-export delay flow-create 30
The following example shows how to display the flow-export destination configurations:
hostname (config)# show running-config flow-export destination
flow-export destination inside 192.68.10.70 9996
The following example shows how to display the flow-export template configuration:
hostname (config)# show running-config flow-export template
flow-export template timeout-rate 1
The following example shows how to display flow-export syslog messages:
hostname# show logging flow-export-syslogs
Syslog ID Type Status
302013 Flow Created Enabled
302015 Flow Created Enabled
302017 Flow Created Enabled
302020 Flow Created Enabled
302014 Flow Deleted Enabled
302016 Flow Deleted Enabled
302018 Flow Deleted Enabled
302021 Flow Deleted Enabled
106015 Flow Denied Enabled
106023 Flow Denied Enabled
313001 Flow Denied Enabled
313008 Flow Denied Enabled
710003 Flow Denied Enabled
106100 Flow Created/Denied Enabled
The following example shows how to display current syslog message settings:
hostname (config)# show running-config logging
no logging message 313008
no logging message 313001