Cisco ASA 5505 User Manual

Page 1794

Advertising
background image

79-14

Cisco ASA 5500 Series Configuration Guide using the CLI

Chapter 79 Configuring SNMP

Information About SNMP

clogMessageGenerated

(CISCO-SYSLOG-MIB)

clogHistFacility, clogHistSeverity,
clogHistMsgName,
clogHistMsgText,
clogHistTimestamp

Syslog messages are generated.

The value of the clogMaxSeverity object
is used to decide which syslog messages
are sent as traps.

The snmp-server enable traps syslog
command is used to enable and disable
transmission of these traps.

clrResourceLimitReached

(CISCO-L4L7MODULE-RESOURCE
-LIMIT-MIB)

crlResourceLimitValueType,
crlResourceLimitMax,
clogOriginIDType, clogOriginID

The snmp-server enable traps
connection-limit-reached
command is
used to enable transmission of the
connection-limit-reached notification.
The clogOriginID object includes the
context name from which the trap
originated.

coldStart

(SNMPv2-MIB)

The SNMP agent has started.

The snmp-server enable traps snmp
coldstart
command is used to enable and
disable transmission of these traps.

cpmCPURisingThreshold

(CISCO-PROCESS-MIB)

cpmCPURisingThresholdValue,
cpmCPUTotalMonIntervalValue,
cpmCPUInterruptMonIntervalValue,
cpmCPURisingThresholdPeriod,
cpmProcessTimeCreated,
cpmProcExtUtil5SecRev

The snmp-server enable traps cpu
threshold rising
command is used to
enable transmission of the cpu threshold
rising notification. The
cpmCPURisingThresholdPeriod object is
sent with the other objects.

entConfigChange

(ENTITY-MIB)

The snmp-server enable traps entity
config-change fru-insert fru-remove

command is used to enable this
notification.

Note

This notification is only sent in
multimode when a security
context is created or removed.

linkDown

(IF-MIB)

ifIndex, ifAdminStatus,
ifOperStatus

The linkdown trap for interfaces.

The snmp-server enable traps snmp
linkdown
command is used to enable and
disable transmission of these traps.

linkUp

(IF-MIB)

ifIndex, ifAdminStatus,
ifOperStatus

The linkup trap for interfaces.

The snmp-server enable traps snmp
linkup
command is used to enable and
disable transmission of these traps.

Table 79-5

Supported Traps (Notifications) (continued)

Advertising