Cisco ASA 5505 - Manual (Page 8)

Contents
viii
Cisco ASA 5500 Series Configuration Guide using the CLI
Removing a Security Context 5-24
Changing the Admin Context 5-24
Changing the Security Context URL 5-25
Reloading a Security Context 5-26
Reloading by Clearing the Configuration 5-26
Reloading by Removing and Re-adding the Context 5-27
Monitoring Security Contexts 5-27
Viewing Context Information 5-27
Viewing Resource Allocation 5-29
Viewing Resource Usage 5-32
Monitoring SYN Attacks in Contexts 5-33
Viewing Assigned MAC Addresses 5-35
Viewing MAC Addresses in the System Configuration 5-36
Viewing MAC Addresses Within a Context 5-37
Configuration Examples for Multiple Context Mode 5-38
Feature History for Multiple Context Mode 5-39
P A R T
3 Configuring Interfaces
C H A P T E R
6 Starting Interface Configuration (ASA 5510 and Higher) 6-1
Information About Starting ASA 5510 and Higher Interface Configuration 6-1
Auto-MDI/MDIX Feature 6-2
Interfaces in Transparent Mode 6-2
Management Interface 6-2
Management Interface Overview 6-2
Management Slot/Port Interface 6-2
Using Any Interface for Management-Only Traffic 6-3
Management Interface for Transparent Mode 6-3
No Support for Redundant Management Interfaces 6-4
Management 0/0 Interface on the ASA 5512-X through ASA 5555-X 6-4
Redundant Interfaces 6-4
Redundant Interface MAC Address 6-4
EtherChannels 6-5
Channel Group Interfaces 6-5
Connecting to an EtherChannel on Another Device 6-5
Link Aggregation Control Protocol 6-6
Load Balancing 6-7
EtherChannel MAC Address 6-7
Licensing Requirements for ASA 5510 and Higher Interfaces 6-8