Licensing requirements for the phone proxy – Cisco ASA 5505 User Manual

Page 986

Advertising
background image

48-4

Cisco ASA 5500 Series Configuration Guide using the CLI

Chapter 48 Configuring the Cisco Phone Proxy

Licensing Requirements for the Phone Proxy

Cisco Unified IP Phone 7941G-GE

Cisco Unified IP Phone 7940 (SCCP protocol support only)

Cisco Unified Wireless IP Phone 7921

Cisco Unified Wireless IP Phone 7925

Note

To support Cisco Unified Wireless IP Phone 7925, you must also configure MIC or LSC on the
IP phone so that it properly works with the phone proxy.

CIPC for softphones ( CIPC versions with Authenticated mode only)

Note

The Cisco IP Communicator is supported with the phone proxy VLAN Traversal in
authenticated TLS mode. We do not recommend it for remote access because SRTP/TLS is not
supported currently on the Cisco IP Communicator.

Note

The ASA supports inspection of traffic from Cisco IP Phones running SCCP protocol version 19 and
earlier.

Licensing Requirements for the Phone Proxy

The Cisco Phone Proxy feature supported by the ASA require a Unified Communications Proxy license.

The following table shows the Unified Communications Proxy license details by platform:

Note

This feature is not available on No Payload Encryption models.

Model

License Requirement

1

ASA 5505

Base License and Security Plus License: 2 sessions.

Optional license: 24 sessions.

ASA 5510

Base License and Security Plus License: 2 sessions.

Optional licenses: 24, 50, or 100 sessions.

ASA 5520

Base License: 2 sessions.

Optional licenses: 24, 50, 100, 250, 500, 750, or 1000 sessions.

ASA 5540

Base License: 2 sessions.

Optional licenses: 24, 50, 100, 250, 500, 750, 1000, or 2000 sessions.

ASA 5550

Base License: 2 sessions.

Optional licenses: 24, 50, 100, 250, 500, 750, 1000, 2000, or 3000 sessions.

ASA 5580

Base License: 2 sessions.

Optional licenses: 24, 50, 100, 250, 500, 750, 1000, 2000, 3000, 5000, or 10,000 sessions.

2

Advertising