Teac GigaStudio 3 - Manual (Page 144)

144 145
When you hear a wave you want to keep, simply drag it to a specific key on the top
Distributed Wave Instrument keyboard display. The dragged file will be removed from
the Audition Panel and placed in the Distributed Wave Instrument. Continue to load
more waves from the Audition Panel to the Distributed Wave Instruments.
It is possible to listen to both sections (exclusively) by clicking their respective key-
board displays or by playing a MIDI keyboard. To do this with an external MIDI source,
be sure to click in the respective areas to give it the focus. If you watch the MIDI Mixer
channel view where the Distributed Wave stacked instrument is, you can see that as the
focus is switched from the Audition Panel (which is clearly labeled in the loader slot) to
the Distributed Wave (also clearly labeled) the one not being played is muted so that
you can hear waves mapped to the same MIDI note but on different parts of the DW
window.
Once you have a carefully sorted collection in the top Distributed Wave Instrument
area, it may look something like this.
At this point you can save the collection as a
Distributed Wave Instrument by clicking the “Save”
button and either give it a new name or save it over
another Distributed Wave Instrument.