Teac GigaStudio 3 - Manual (Page 213)

212 213
DSP Station Aux Busses
Narrow/Wide Views
Each DSP Station Aux Buss pair can be viewed in either narrow (default) or wide (de-
tailed) view. Both narrow and wide views provide access to the same functions. The only
extra benefit with wide view is more horizontal space is provided for text display in the
insert, name, and output fields.
In the default narrow channel
view, all the controls such as fader
levels, pan, input and output routing
are available. The wide view provides
wider view for the text fields.
To expand a channel to wide view,
click in the very top area where the
Aux Busses are displayed. To collapse
the Aux Buss down to narrow view,
click the same area. Narrow or wide
view is available on an Aux Buss by
Aux Buss basis.
Source Input Selection
There is no way to define an Aux input source in the Aux Buss view. You must assign
an Aux Send to an Aux Buss by assigning it with one of the eight Aux Sends the avail-
able in either the Input or Group Channel strips. The Aux Send numbers correspond
with the numbered Aux Busses in this view.
Insert Activation Button
Activate/by-pass the inserts. There are three possible states for each of these buttons.
• A grey button indicates that no effects are loaded, activated, or bypassed. This is
the default state of a channel strip.
• A bright green button indicates that the respective insert is activated and is cur-
rently not bypassed.
• A dim green button indicates that the respective insert is activated, but is currently
bypassed.