Teac GigaStudio 3 - Manual (Page 270)

270 271
Perspective:
Adjust the individual Mic channel perspectives. See the Mic Masters section for more
details.
Wet/Dry Mix:
Adjust the individual Mic channel Wet/Dry mixes. See the Mic Masters section for
more details.
Pre-Delay:
Sample accurate adjustment for time alignment. See the Mic Masters section for
more details.
Mic Channel On button:
Enable a Mic Group channel by clicking On button so that it is active. When you se-
lect a mic button in the Placement Selection grid the corresponding Mic Group On but-
ton will follow the selection.
Mic Replacement
Each of the mic groups has its own mic replacement selection menus for the original
mic as well as the replacement mic. Each default setting is normally in the none-flat
setting (no mic models being used at all).
Application: If you have a sampled instrument library that used a particular micro-
phone, you would select that mic from the “Original Mic” list, for instance the U47.
Of course, every microphone is different due to variations in manufacturing, age,
and wear and will have a slightly different impulse response. If a given microphone is
kept in mint condition, it should be close to the ones used for the GigaPulse mic models.
All the GigaPulse mic models have the following qualities:
• original factory mint condition
• representative of shipping models, no custom modifications
With this in mind, the end result is not going to be perfect, given the physical vari-
ables that are possible, but there will be a significant result, nonetheless.
Original Mic drop down list:
In the “Original Mic” drop-down list the “inv” represents an
“inverse” impulse response. This essentially removes the char-
acter of the selected microphone from the original sampled
instrument library.