Watson-Marlow MM420 - Manual (Page 26)

2 Installation Issue 10/06
MICROMASTER 420 Operating Instructions
26 6SE6400-5AA00-0BP0
Upper
rail latch
Lower
rail latch
Release Mechanism
2.3.1 Mounting on standard rail, Frame Size A
Fitting the Inverter to a 35 mm standard rail (EN 50022)
1. Fit the inverter to the rail using the upper rail
latch.
2. Push the
inverter
against the
rail and the
lower rail
latch should
click into
place.
Removing the Inverter from the rail
1. To disengaged the release mechanism of the inverter, insert a screwdriver into
the release mechanism.
2. Apply a downward pressure and the lower rail latch will disengage.
3. Pull the inverter from the rail.