RIGOL M300 - Manual (Page 11)

Chapter 1 Programming Overview RIGOL
Programming Guide for DM3000 1-5
Command Set Introduction
To meet the different requirements of users, DM3000 provides
RIGOL command set
and two other command sets that are compatible with DM3000.
 RIGOL DM3000 command Set
 Compatible Agilent command Set
 Compatible Fluke command Set
By default,
RIGOL command set is used at power-on. You can send the CMDSet
command to switch the command set. The format of the command is as follows.
CMDSet {RIGOL|AGILENT|FLUKE}
CMDSet?