RIGOL M300 - Manual (Page 47)

Chapter 2 Command System RIGOL
Programming Guide for DM3000 2-35
:TRIGger Commands
The commands are used to set the trigger system parameters. The commands
include:
 :TRIGger:SOURce
 :TRIGger:AUTO:INTErval
 :TRIGger:AUTO:HOLD
 :TRIGger:AUTO:HOLD:SENSitivity
 :TRIGger:SINGle
 :TRIGger:SINGle:TRIGger
 :TRIGger:EXT
 :TRIGger:VMComplete:POLAr
 :TRIGger:VMComplete:PULSewidth