RIGOL M300 - Manual (Page 69)

Chapter 3 Commands Compatibility RIGOL
Programming Guide for DM3000 3-3
{MINimum|MAXimum}
CALCulate:LIMit:UPPer {<value>|MAXimum} measurement function.
CALCulate:NULL:OFFSet?
{MINimum|MAXimum}
CALCulate:NULL:OFFSet
{<value>|MINimum|MAXimum}
Query and set the offset of NULL operation.
CALCulate:STATe?
Query the state of the operation selected using the
CALCulate:FUNCtion command.
CONFigure? Query the current configuration of the instrument.
CONFigure:CAPacitance
[{<range>|AUTO|MIN|MAX|DEF}[,{<resolut
ion>|MIN|MAX|DEF}]]
Restore all the capacitance measurement
parameters and trigger parameters to their defaults,
and then configure the multimeter for capacitance
measurement.
CONFigure:CONTinuity
Restore all the continuity measurement parameters
and trigger parameters to their defaults, and then
configure the multimeter for continuity
measurement.
CONFigure:CURRent:AC
[{<range>|AUTO|MIN|MAX|DEF}[,{<resolut
ion>|MIN|MAX|DEF}]]
Restore all the AC current measurement parameters
and trigger parameters to their defaults, and then
configure the multimeter for AC current
measurement.
CONFigure:CURRent[:DC]
[{<range>|AUTO|MIN|MAX|DEF}[,{<resolut
ion>|MIN|MAX|DEF}]]
Restore all the DC current measurement parameters
and trigger parameters to their defaults, and then
configure the multimeter for DC current
measurement.
CONFigure:DIODe
Restore all the diode measurement parameters and
trigger parameters to their defaults, and then
configure the multimeter for diode measurement.
CONFigure:FREQuency
[{<range>|MIN|MAX|DEF}[,{<resolution>|
MIN|MAX|DEF}]]
Restore all the frequency measurement parameters
and trigger parameters to their defaults, and then
configure the multimeter for frequency
measurement.
CONFigure:FRESistance
[{<range>|AUTO|MIN|MAX|DEF}[,{<resolut
ion>|MIN|MAX|DEF}]]
Restore all the 4-wire resistance measurement
parameters and trigger parameters to their defaults,
and then configure the multimeter for 4-wire
resistance measurement.