RIGOL M300 - Manual (Page 81)

Chapter 3 Commands Compatibility RIGOL
Programming Guide for DM3000 3-15
SYSTem:COMMunicate:LAN:SMASk
"<mask>"*
SYSTem:LANGuage?
SYSTem:LANGuage {EN|CH}
Query and set the display language (Chinese or
English) of the instrument.
SYSTem:VERSion?
Query the version of the SCPI (Standard Commands
for Programmable Instruments) standard that is
used by the instrument.
SYSTem:ERRor?
Read and clear an error from the instrument's error
queue.
TRIGger:COUNt? [{MIN|MAX}]
TRIGger:COUNt
{<count>|MIN|MAX|INFinity}
Query and set the number of triggers of the
instrument.
TRIGger:DELay? [{MIN|MAX}]
TRIGger:DELay {<second>|MIN|MAX|DEF} Query and set the delay between the trigger signal
and the measurement.
TRIGger:DELay:AUTO?
TRIGger:DELay:AUTO {ON|OFF|1|0} Query and set the state of the auto trigger delay
function.
TRIGger:SLOPe?
TRIGger:SLOPe <slope>
Query and set the edge type (rising edge or falling
edge) of external trigger of the instrument. <slope>
can be POSitive or NEGative.
TRIGger:SOURce?
TRIGger:SOURce <source>
Query and set the current trigger source of the
instrument.
<source> can be AUTO, SINGLE or EXT.
Note: commands marked with * are only applicable to DM3064, DM3062, DM3054
and DM3052.