RIGOL M300 - Manual (Page 61)

Chapter 2 Command System RIGOL
Programming Guide for DM3000 2-49
<range> Sample rate (number
of samples/time)
Return value
1 1/10 m 1/10MIN
2 1/5 m 1/5MIN
3 1/m 1/1MIN
4 1/10 s 1/10SEC
5 1/s 1/SEC
6 10/s 10/SEC
7 50/s 50/SEC
8 100/s 100/SEC
9 833/s 833/SEC
10 1 k/s 1000/SEC
11 5 k/s 5000/SEC
12 10 k/s 10000/SEC
13 50 k/s 50000/SEC
10. :DATAlog:RUN
Syntax
:DATAlog:RUN
Function Execute the configured data acquisition task.
11. :DATAlog:RUN?
Syntax
:DATAlog:RUN?
Function Query the state of the current data acquisition.
The query returns RUN or STOP.
12. :DATAlog:STOP
Syntax
:DATAlog:STOP
Function Stop the data acquisition.
13. :DATAlog:DATA?
Syntax
:DATAlog:DATA? <value1>,<value2>
Function The query returns specified number of acquired data starting from
the specified number.
Explanation  The acquired data are numbered from 1 on and saved after the
start of acquisition.

<value1> defines the start position of the returned data.
 <value2> defines the number of data (within 1 and 100) to be