RIGOL M300 - Manual (Page 36)

RIGOL Chapter 2 Command System
Programming Guide for DM3000 2-24
:RESOlution:CURRent:DC 1
5. :RESOlution:CURRent:AC
Syntax
:RESOlution:CURRent:AC?
:RESOlution:CURRent:AC {0|1|2|MIN|MAX|DEF}
Function Set the reading resolution of AC current measurement.
The query returns 0, 1 or 2.
Explanation  The AC current measurement function must be enabled before
using this command.
 For the reading resolution of each parameter, please refer to
“Explanation” in :RESOlution:VOLTage:AC.
Example Set the reading resolution of AC current measurement to 5 ½
digits:
:RESOlution:CURRent:AC 2
6. :RESOlution:RESistance
Syntax
:RESOlution:RESistance?
:RESOlution:RESistance {0|1|2|MIN|MAX|DEF}
Function Set the reading resolution of 2-wire resistance measurement.
The query returns 0, 1 or 2.
Explanation  The 2-wire resistance measurement function must be enabled
before using this command.
 For the reading resolution of each parameter, please refer to
the “Explanation” in :RESOlution:VOLTage:DC.
Example Set the reading resolution of 2-wire resistance measurement to
5 ½ digits:
:RESOlution:RESistance 1
7. :RESOlution:FRESistance
Syntax
:RESOlution:FRESistance?
:RESOlution:FRESistance {0|1|2|MIN|MAX|DEF}
Function Set the reading resolution of 4-wire resistance measurement.
The query returns 0, 1 or 2.
Explanation  The 4-wire resistance measurement function must be enabled
before using this command.
 For the reading resolution of each parameter, please refer to
the “Explanation” in :RESOlution:VOLTage:DC.