RIGOL M300 - Manual (Page 72)

RIGOL Chapter 3 Commands Compatibility
Programming Guide for DM3000 3-6
[SENSe:]CAPacitance:RANGe:AUTO <mode> of capacitance measurement.
[SENSe:]CAPacitance:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]CAPacitance:RANGe[:UPPer]
{<range>|MIN|MAX|DEF}
Query and set the range of capacitance
measurement.
[SENSe:]CURRent:AC:BANDwidth?
[{MIN|MAX}]
[SENSe:]CURRent:AC:BANDwidth
{<filter>|MIN|MAX|DEF}
Query the filter bandwidth of AC current
measurement and the query returns the boundary
value of the bandwidth (3, 20 or 200).
Set the filter bandwidth of AC current measurement
and <filter> could be 3, 20 or 200.
[SENSe:]CURRent:AC:NULL[:STATe]?
[SENSe:]CURRent:AC:NULL[:STATe]
{ON|OFF}
Query and set the state of the NULL function of AC
current measurement.
[SENSe:]CURRent:AC:NULL:VALue?
[{MIN|MAX}]
[SENSe:]CURRent:AC:NULL:VALue
{<value>|MIN|MAX}
Query and set the NULL value of AC current
measurement.
[SENSe:]CURRent:AC:PEAK:STATe?
[SENSe:]CURRent:AC:PEAK:STATe {ON|OFF}
Query and set the state of the peak-peak
measurement function of AC current measurement.
Note: DM3000 only receives this command but
does not support the peak-peak measurement
function.
[SENSe:]CURRent:AC:RANGe:AUTO?
[SENSe:]CURRent:AC:RANGe:AUTO
<mode>
Query and set the state of the auto range function
of AC current measurement.
[SENSe:]CURRent:AC:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]CURRent:AC:RANGe[:UPPer]
{<range>|MIN|MAX|DEF}
Query and set the range of AC current
measurement.
[SENSe:]CURRent[:DC]:APERture?
[{MIN|MAX}]
[SENSe:]CURRent[:DC]:APERture
{<second>|MIN|MAX|DEF} Query and set the aperture time of DC current
measurement.
Note: DM3000 only receives this command but
does not respond to it.
[SENSe:]CURRent[:DC]:NPLC? [{MIN|MAX}]
[SENSe:]CURRent[:DC]:NPLC
{<PLCs>|MIN|MAX|DEF}
Query and set the integral time of DC current
measurement. The input value and return value are
both multiples of PLC.
Note: DM3000 only receives this command but