RIGOL M300 - Manual (Page 56)

RIGOL Chapter 2 Command System
Programming Guide for DM3000 2-44
The query returns PASS or FAIL.
Explanation Limit operation function must be enabled before sending this
command.
17. :CALCulate:LIMIt:LOWEr
Syntax
:CALCulate:LIMIt:LOWEr?
:CALCulate:LIMIt:LOWEr {
<range> |MIN|DEF}
Function Set the lower limit of Limit operation.
The query returns the lower limit of Limit operation under the current
measurement function in scientific notation.
Explanation  The lower limit should not be greater than the upper limit. For
more details, refer to :CALCulate:LIMIt:UPPEr.
 The range of
<range> depends on the current measurement
function.
Measurement <range> Default Unit
DC voltage ±1200 0 V
AC voltage 0 - 900 0 V
DC current ±12 0 A
AC current 0 - 12 0 A
Resistance 0 - 1.2e+08 0 Ω
Capacitance 0 - 2.4e-04 0 F
Frequency 3 - 3.0e+05 3 Hz
Period 3.0e-06 - 3.0e-01 3.0e-06 s
Ratio ±1.0e+09 -1.0e+09
18. :CALCulate:LIMIt:UPPEr
Syntax
:CALCulate:LIMIt:UPPEr?
:CALCulate:LIMIt:UPPEr {
<range> |MAX|DEF}
Function Set the upper limit of Limit operation.
The query returns the upper limit of Limit operation under the current
measurement function in scientific notation.
Explanation  The upper limit should not be lower than the lower limit. For more
details, refer to :CALCulate:LIMIt:LOWEr.
 The range of <range> depends on the current measurement
function.
Measurement Range Default Unit
DC voltage ±1200 1 V