RIGOL M300 - Manual (Page 16)

RIGOL Chapter 2 Command System
Programming Guide for DM3000 2-4
:FUNCtion Commands
The commands are used to enable the common measurement functions of the
instrument and have the same functions as the corresponding buttons at the front
panel. These commands mainly include:
 :FUNCtion?
 :FUNCtion:VOLTage:DC
 :FUNCtion:VOLTage:DC:RATIo
 :FUNCtion:VOLTage:AC
 :FUNCtion:CURRent:DC
 :FUNCtion:CURRent:AC
 :FUNCtion:RESistance
 :FUNCtion:FRESistance
 :FUNCtion:FREQuency
 :FUNCtion:PERiod
 :FUNCtion:CONTinuity
 :FUNCtion:DIODe
 :FUNCtion:CAPacitance