RIGOL M300 - Manual (Page 27)

Chapter 2 Command System RIGOL
Programming Guide for DM3000 2-15
secondary display is enabled in AC current measurement.
30. :MEASure:CURRent:AC:FREQuency:STATe?
Syntax
:MEASure:CURRent:AC:FREQuency:STATe?
Function Query whether the frequency is displayed on the secondary screen
during AC current measurement.
The query returns DISPLAY or HIDE.
31. :MEASure:RESistance?
Syntax
:MEASure:RESistance?
Function The query returns the 2-wire resistance measurement value in
scientific notation and the unit is Ω.
32. :MEASure:RESistance
Syntax
:MEASure:RESistance {0|1|2|3|4|5|6|MIN|MAX|DEF}
Function Set the range of 2-wire resistance measurement.
Explanation  The measurement mode will change to “Manual” while you set the
range.
 The range corresponding to each parameter is as follows.
Parameter Range
DM306x DM305x
0 200 Ω 400 Ω
1 2 kΩ 4 kΩ
2 20 kΩ 40 kΩ
3 200 kΩ 400 kΩ
4 1 MΩ 4 MΩ
5 10 MΩ 100 MΩ
6 100 MΩ
MAX 100 MΩ 100 MΩ
MIN 200 Ω 400 Ω
DEF 200 kΩ 400 kΩ
Example Set the range of 2-wire resistance measurement to the minimum:
:MEASure:RESistance 0 or
:MEASure:RESistance MIN
33. :MEASure:RESistance:RANGe?
Syntax
:MEASure:RESistance:RANGe?