RIGOL M300 - Manual (Page 73)

Chapter 3 Commands Compatibility RIGOL
Programming Guide for DM3000 3-7
does not support the NPLC value setting function.
[SENSe:]CURRent[:DC]:NULL[:STATe]?
[SENSe:]CURRent[:DC]:NULL[:STATe]
{ON|OFF}
Query and set the state of the NULL function of DC
current measurement.
[SENSe:]CURRent[:DC]:NULL:VALue?
[{MIN|MAX}]
[SENSe:]CURRent[:DC]:NULL:VALue
{<value>|MIN|MAX}
Query and set the NULL value of DC current
measurement.
[SENSe:]CURRent[:DC]:PEAK:STATe?
[SENSe:]CURRent[:DC]:PEAK:STATe
{ON|OFF}
Query and set the state of the peak-peak
measurement function of DC current measurement.
Note: DM3000 only receives the command but
does not support the peak-peak measurement
function.
[SENSe:]CURRent[:DC]:RANGe:AUTO?
[SENSe:]CURRent[:DC]:RANGe:AUTO
<mode>
Query and set the state of the auto range function
of DC current measurement.
[SENSe:]CURRent[:DC]:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]CURRent[:DC]:RANGe[:UPPer]
{<range>|MIN|MAX|DEF}
Query and set the range of DC current
measurement.
[SENSe:]CURRent[:DC]:RESolution?
[{MIN|MAX}]
[SENSe:]CURRent[:DC]:RESolution
{<resolution>|MIN|MAX|DEF}
Query and set the reading resolution of DC current
measurement.
[SENSe:]FREQuency:APERture?
[{MIN|MAX}]
[SENSe:]FREQuency:APERture
{<second>|MIN|MAX|DEF} Query and set the aperture time of frequency
measurement.
Note: DM3000 only receives the command but
does not respond to it.
[SENSe:]FREQuency:NULL[:STATe]?
[SENSe:]FREQuency:NULL[:STATe]
{ON|OFF}
Query and set the state of the NULL function of
frequency measurement.
[SENSe:]FREQuency:NULL:VALue?
[{MIN|MAX}]
[SENSe:]FREQuency:NULL:VALue
{<value>|MIN|MAX}
Query and set the NULL value of frequency
measurement.
[SENSe:]FREQuency:RANGe:LOWer?
[{MIN|MAX}] Query and set the lower limit of AC bandwidth of
frequency measurement. <filter> can be 3, 20 or