RIGOL M300 - Manual (Page 70)

RIGOL Chapter 3 Commands Compatibility
Programming Guide for DM3000 3-4
CONFigure:PERiod
[{<range>|MIN|MAX|DEF}[,{<resolution>|
MIN|MAX|DEF}]] Restore all the period measurement parameters and
trigger parameters to their defaults, and then
configure the multimeter for period measurement.
CONFigure:RESistance
[{<range>|AUTO|MIN|MAX|DEF}[,{<resolut
ion>|MIN|MAX|DEF}]]
Restore all the 2-wire resistance measurement
parameters and trigger parameters to their defaults,
and then configure the multimeter for 2-wire
resistance measurement.
CONFigure[:VOLTage]:AC
[{<range>|AUTO|MIN|MAX|DEF}[,{<resolut
ion>|MIN|MAX|DEF}]]
Restore all the AC voltage measurement parameters
and trigger parameters to their defaults, and then
configure the multimeter for AC voltage
measurement.
CONFigure[:VOLTage][:DC]
[{<range>|AUTO|MIN|MAX|DEF}[,{<resolut
ion>|MIN|MAX|DEF}]]
Restore all the DC voltage measurement
parameters and trigger parameters to their defaults,
and then configure the multimeter for DC voltage
measurement.
DATA:COPY
Save the history measurement data into “File 10”
under “MeasData” in the nonvolatile memory of the
instrument with the name “MeasData”.
DATA:DELete NVMEM
Delete the data saved in the nonvolatile memory
using the command “DATA:COPY”.
DATA:LAST? Query the latest measurement result.
DATA:POINts? [{RDG_STORE|MNMEM}]
Query the current number of measurement values.
This number corresponds to the number of
measurements shown in the measurement history.
FETCh?
Query the data in the output buffer of the
instrument and read them into the PC.
FETCh:CURRent:AC:PTPeak?
Query the difference between the maximum and
minimum AC transient currents.
Note: this command is only available in AC current
measurement function when the statistic function is
enabled.
FETCh:CURRent[:DC]:PEAK:MAXimum?
Query the maximum DC transient current in DC
current measurement.
Note: this command is only available in DC current
measurement function when the statistic function is
enabled.
FETCh:CURRent[:DC]:PEAK:MINimum? Query the minimum DC transient current in DC